• HOME

• Products

  • Lime Plasters

    • Stucco Lamundo - Venetian Plaster (Gloss Finish)
    • Tonachino Sahara - Smooth Plaster (Flat Finish)
    • Intonaco Panizza - Rough Sand Finish Plaster
    • Tonachino Firenze - Fine Grain Lime Based Plaster
    • Marmorino Tintoretto - Fine Grain Lime & Marble Dust
    • Marmarino Palladino - Medium Grain Lime & Marble Dust
    • Vega - Tuscany Look Lime Based Powder Plaster

  • Acrylic Plasters

    • Venezia Elastic - Elastomeric Textured Plaster
    • Antique Domingo - Acrylic Fine Textured Plaster

  • Decorative Paints

    • Tuscany Multicolor - Multicolor Finish
    • Riflessi Metallic - Metallic Glaze
    • Damasco Velvet - Suede Metallic Finish
    • Meoded Lime Wash - Edged Wall Look
    • Meoded Lime Wash Undercoat

  • Primers

    • Meoded Quartz - Exterior & Interior
    • Vega Primer - Rough Sandy

  • Sealer/Wax

    • Lamundo Wax - Enhances Gloss Finish
    • Hydrowax - Water Based Wax

  • Plaster Glaze

    • Velature - Acrylic Dilutable

  • New Products

    • Cassiopeia

  • Price List

    • Price List
• TRAINING
• DISTRIBUTORS

• Showcase

  • Interior Pictures
  • Exterior Pictures
  • Showroom
• ABOUT US
• CONTACT US

Product Description:

Tonachino Firenze ^TM is a natural lime-based plaster which is used as a decorative wall covering system. This modern version of an early Italian plaster can be used to create magnificent exterior and interior finishes. Its natural makeup allows the Firenze ^TM to replicate the authentic "Old-World" sand finish.

With a unique blend of natural ingredients, like slaked lime, river sands, and marble dust, along with polymer admixtures, Firenze ^TM possesses suburb adhesion, durability, and water repellency.

• Preparation:
  • Surface should be smooth, clean and free of contamination.
  • Interior new surface - Prime substrate with PVA acrylic primer and let it dry fully. Apply one coat of diluted Meoded Quartz Primer ^TM allowing it 3-5 hours to dry.
  • Interior & Exterior existing surface - Sand oil-based paints and glossy surfaces.
  • Prime substrate with multi-purpose primer and let it dry fully. Then apply one coat of diluted Meoded Quartz Primer ^TM allowing it 3-5 hours to dry.
  • Preparation of flat surfaces requires only the application of diluted Meoded Quartz Primer ^TM.
  • Exterior Brown coat - First surface should be pressure washed and clean. When surface is fully dry, apply Meoded Quartz Primer ^TM diluted with 50% water. Let it dry at least 3-5 hours. To economize costs, it is recommended to apply a leveling coat using finer grain cement or acrylic base material over the brown coat to fill up low spots and create a flat surface.
• Application: Use stainless steel trowel to apply Tonachino Firenze ^TM.
  First coat - Apply first coat in the same fashion you would apply a standard joint compound: in a smooth even fashion leaving a wet edge to avoid lap marks. While the plaster is still moist, it is recommended to use a wet sponge or a plastic float to create a more uniform design. Allow at least 12 hours to dry.
  Second coat - If required to smooth, lightly sand first coat with 180-320 grit sandpaper before proceeding. Apply second coat in the same manner as first coat. While Firenze ^TM is still moist, it is recommended to use a wet sponge or a plastic float to create a more uniform design. Avoid formation of dark trowel marks.
• Coverage: 20 kg 90-200 sq. ft. for two coats; depending on surface and texture.
• Tinting: Tonachino Firenze ^TM can be tinted to any color using Universal tints or machine colorants. It is recommended to use Meoded natural concentrated pigments.
• Sealer: After a minimum of 48 hours dry, Water Block ^TM, a water-repellent sealer is recommended to provide your finish with protection from moisture and dirt.
• Container: 1 kg ,5 kg and 20 kg
• Caution: Keep out of reach of children. Do not take internally.

We care about the environment, therefore All MEODED PAINTS products are ECO Friendly!