• HOME

• Products

  • Lime Plasters

    • Stucco Lamundo - Venetian Plaster (Gloss Finish)
    • Tonachino Sahara - Smooth Plaster (Flat Finish)
    • Intonaco Panizza - Rough Sand Finish Plaster
    • Tonachino Firenze - Fine Grain Lime Based Plaster
    • Marmorino Tintoretto - Fine Grain Lime & Marble Dust
    • Marmarino Palladino - Medium Grain Lime & Marble Dust
    • Vega - Tuscany Look Lime Based Powder Plaster

  • Acrylic Plasters

    • Venezia Elastic - Elastomeric Textured Plaster
    • Antique Domingo - Acrylic Fine Textured Plaster

  • Decorative Paints

    • Tuscany Multicolor - Multicolor Finish
    • Riflessi Metallic - Metallic Glaze
    • Damasco Velvet - Suede Metallic Finish
    • Meoded Lime Wash - Edged Wall Look
    • Meoded Lime Wash Undercoat

  • Primers

    • Meoded Quartz - Exterior & Interior
    • Vega Primer - Rough Sandy

  • Sealer/Wax

    • Lamundo Wax - Enhances Gloss Finish
    • Hydrowax - Water Based Wax

  • Plaster Glaze

    • Velature - Acrylic Dilutable

  • New Products

    • Cassiopeia

  • Price List

    • Price List
• TRAINING
• DISTRIBUTORS

• Showcase

  • Interior Pictures
  • Exterior Pictures
  • Showroom
• ABOUT US
• CONTACT US

Product Description:

Stucco Lamundo ^TM is a genuine lime-based Venetian plaster formulated for easy application and exceptional durability.
This interior wall coating system is a tintable paste which allows the achievement of highly polished marble-like finish on almost any interior surface.

Lamundo ^TM is particularly elegant and is designed for precious wall spaces for Villas, commercial, spaces, theaters, offices and any environment where a high-end atmosphere is desired.

• Preparation:
  • Surface should be smooth, clean and dust free.
  • New surface - Prime substrate with PVA acrylic primer and let it dry fully. Apply one coat of Meoded Quartz Primer ^TM allowing it 3-5 hours to dry.
  • Existing surface - Any surface with sheen should be sanded, then prime the surface with multi-purpose primer and let it dry fully. Next apply one coat of Meoded Quartz Primer ^TM allowing it to dry for 3-5 hours.
  • Preparation of flat surfaces requires only the application of Meoded Quartz Primer ^TM.
• Application: Use stainless steel trowel or spatula to apply the three coats of Stucco Lamundo ^TM.
  First coat - First coat of Stucco Lamundo ^TM should be applied thinly and evenly, covering the entire wall. Allow at least 12 hours for the base coat to dry.
  Second coat - If it's necessary to smooth, slightly sand the first coat with 180-320 grit sandpaper before proceeding. The second coat should be applied and spread tightly in an overlapping patches pattern. Allow second coat to dry for at least 5-7 hours.
  Third coat & Burnishing - Apply this finish coat in the same manner as second coat. When the surface material is still moist start Burnishing by gradually pressing and smoothing the material in 10-15 sq. ft. sections. The more you burnish the shinier and glossier the surface will become.
• Tinting: Stucco Lamundo ^TM can be tinted to any color using Universal tints or machine colorants. It is recommended to use Meoded's natural concentrated pigments.
• Coverage: 20 kg 350-450 sq. ft. for three coats, depending on surface and texture.
• Sealer: After allowing a minimum of 48 hours to dry, it is recommended that you apply a protective coat of Lamundo Wax ^TM to provide your finish with protection from moisture and dirt while also enhancing sheen and gloss.
• Special Effects: Unique Metallic effects and custom stencils can be used to enhance the elegant and rich appearance of Stucco Lamundo ^TM.
• Container: 1 kg , 5 kg and 20 kg
• Caution: Keep out of reach of children. Do not take internally.

We care about the environment, therefore All MEODED PAINTS products are ECO Friendly!